美国NDT James C-CM-4000 Cor-Map钢筋锈蚀检测仪

首页> 产品> 设备> 工业自动化设备>

来自倍加孚(厦门)科技有限公司

¥面议元/

发布时间 2024-03-27 关注次数 281

倍加孚(厦门)科技有限公司

家家通 6年

进入店铺

店铺留言

商家供应

图文介绍产品参数供应商信息

美国NDT James C-CM-4000 Cor-Map钢筋锈蚀检测仪

产品名称：筋锈蚀检测仪

型号：C-CM-4000

厂家：美国NDT James

产品描述:

简单而经济的测定钢筋潜在腐蚀位置的方法。高阻抗电压表连接钢筋及参考电极, 可量度半电池电势。

A simple economical b for identifying areas of probable rebar corrosion.

Applications

Locate corroding steel reinforcement

Features & Benefits

· Easy to use.

· Detachable electrode extension pieces facilitate measurements in hard to reach bs.

· High impedance digital meter is designed for tough field conditions.

· Electrode is designed for use on horizontal, vertical and inverted bs.

· Economical.

· Conbs to ASTM C-876.

An economical b for identifying areas of corrosion ASTM C-876.

A high impedance voltmeter is connected between the reinforcing steel and a Cu-CuSO4 reference electrode on the concrete surface where a measurement can be made for the half-cell potential.

This measurement of the probability of corrosion activity. By testing at a fixed distance apart, a grid of half-cell potentials can be developed and areas delineated.

Technical

Corrosion, which is an electrochemical process, occurs in concrete when oxygen and moisture are present. The actual corrosion is an exchange of energy within different sections of the uncoated reinforcing steel. The relative energy levels can be determined in relation to a reference electrode with a stable electrochemical potential.

By connecting a high impedance voltmeter between the reinforcing steel and a reference electrode placed on the concrete surface, a measurement can be made for the half cell potential at the b of the reference cell. This then is a measurement of the probability of corrosion activity in the steel in the vicinity of the reference cell.

The reference cell is copper in a copper sulphate solution. By taking half cell potential measurements a fixed distance apart a grid of half cell potentials can be quickly made and thus areas delineated with a high probability of corrosion of the reinforcing steel.

To analyze the results, the measurements made with Cor Map™ can be plotted on a grid and lines of equipotential contours drawn, highlighting areas of possible corrosion activity.

For example the following guide is listed in ASTM

C-876 using a copper/copper sulphate half cell:

· For readings of 350mV and greater there is a 95% chance of active steel corrosion

· For readings 200 to 350mV there is a 50% chance of active steel corrosion

· For readings less than 200mV there is only 5% chance of active steel corrosion

The b is particularly useful for:

· Bridge Decks

· Parking Garages

· Concrete Piers & Docks

· Substructure

· Tunnel Lining

· Foundations

Specifications

C-CM-4500	High impedance voltmeter
C-CM-4410	Electrode extension pieces each 18 inches (41 cm) long
C-CM-4400	Reference electrode including copper sulphate reservoir
C-CM-4210	Container of copper sulphate (capacity 250 ml)
C-CM-4220	Wetting agent reservoir (capacity 125 ml)
C-CM-4420	Dispensing sponge
C-CM-4300	Cable reel with 250 ft. (80 meters) cable
C-CM-4000	Complete system

以上是美国NDT James C-CM-4000 Cor-Map钢筋锈蚀检测仪

美国NDT James相关产品介绍：

美国NDT James T-HT-1000 Humiditest混凝土钻孔湿度测试仪

美国NDT James T-C-10 T-C-20 Cementometer微波水泥含水率测试仪美国NDT James T-S-30 Aquaprobe微波土壤含水率测试仪美国NDT James T-M-170 Aquameter混凝土含水率测试仪美国NDT James T-T-90 Trident插针式微波骨料含水率测试仪美国NDT James I-CB-6000 Carbo Detect混凝土碳化深度酸碱指示剂美国NDT James I-AS-3000 ASR-Detect混凝土碱骨料反应测试仪美国NDT James A-AB-1200 A-AV-1300 A-AA-1100 Air Meters混凝土含气量测试仪美国NDT JAMES Z-WP-1000 Windsor Probe混凝土强度枪击检测仪美国NDT JAMES W-P-2000 Windsor Pin混凝土强度检测仪美国NDT JAMES R-HR-8000 Mini R-Meter钢筋定位仪美国NDT JAMES P-C-7300 Bond Test MK III粘结强度测试仪美国NDT JAMES P-C-728 P-C-729 Anchor锚栓测试仪美国NDT JAMES M-M-3056 Maturity Meter混凝土成熟度测试仪美国NDT JAMES Datascan MK II钢筋混凝****达美国NDT James C-P-6000 C-P-6050 Porosiscope混凝土渗气渗水性测试仪美国NDT James C-CM-4000 Cor-Map钢筋锈蚀检测仪美国NDT James C-CL-3000 Chlorimeter混凝土氯离子含量测定仪美国NDT James W-M-350 W-M-250 Rebound Hamme机械回弹仪美国NDT James W-D-2000 Rebound Hamme数字回弹仪美国NDT James V-E-1000 E-Meter MK II动态弹性模量测试仪美国NDT James V-V-100 Vu-Con冲击回波测试仪美国NDT JAMES V-C-400 V-Meter MK IV混凝土超声波测试仪美国NDT James C-CS-8000 C-CS-8300 Gecor 8钢筋锈蚀程度测定仪美国NDT James C-RM-8000 Ohmcorr混凝土电阻率测定仪美国NDT James C-CM-5000 Cor-Map II大屏幕半电池电压钢筋锈蚀检测仪美国NDT JAMES R-C-400/450/475/410 Rebarscope钢筋扫描仪

倍加孚(厦门)科技有限公司

公司类型私营有限责任公司
经营模式生产加工-私营有限责任公司
联系人林经理
联系手机18059876689
联系固话0592-6054838
公司地址厦门市湖里区永嘉新工业区后埔东里18-114号

主营业务

红外测温仪辐射测温仪双色高温计热风炉红外测温仪

倍加孚(厦门)科技有限公司致力于高精度红外线测温仪、光纤温度传感器、红外温度传感器、高温比色测温仪等研发生产和系统应用。　　研发产品：工业红外线测温仪、红外测温仪、红外光学高温计、窑炉测温装置、焚烧炉测温装置、光纤温度传感器、光纤红外测温仪、DCTQ 铸造用连续测温仪、铝专用测温仪、锻造热处理温度传感器、锻造测温仪、非接触红外热电偶、火焰监测器、点式光纤温度传感器等，为工业用户提供一站式测温解决方案。　　产品已广泛应用于石油、化工、冶金、陶瓷、电力、高校、科研院所等多个领域。公司自成立以来一直秉承“诚实守信，精益求精”的理念，全心全意为您服务，为工业用户提供测温解决方案。　　“圣加弗PLUSFO”、安全的温度传感器生产商，“圣加弗”愿作您永远的朋友，与您携手合作双赢。