倍加孚(厦门)科技有限公司 >> 产品供应 >> 美国NDT James C-CM-4000 Cor-Map钢筋锈蚀检测仪
详细参数

产品详情

美国NDT James C-CM-4000 Cor-Map钢筋锈蚀检测仪

产品名称:筋锈蚀检测仪


型号:C-CM-4000


厂家:美国NDT James


产品描述:

简单而经济的测定钢筋潜在腐蚀位置的方法。高阻抗电压表连接钢筋及参考电极, 可量度半电池电势。

A simple economical b for identifying areas of probable rebar corrosion.


Applications


  • Locate corroding steel reinforcement


Features & Benefits


·         Easy to use.


·         Detachable electrode extension pieces facilitate measurements in hard to reach bs.


·         High impedance digital meter is designed for tough field conditions.


·         Electrode is designed for use on horizontal, vertical and inverted bs.


·         Economical.


·         Conbs to ASTM C-876.


An economical b for identifying areas of corrosion ASTM C-876.


A high impedance voltmeter is connected between the reinforcing steel and a Cu-CuSO4 reference electrode on the concrete surface where a measurement can be made for the half-cell potential.


This measurement of the probability of corrosion activity. By testing at a fixed distance apart, a grid of half-cell potentials can be developed and areas delineated.


Technical


Corrosion, which is an electrochemical process, occurs in concrete when oxygen and moisture are present. The actual corrosion is an exchange of energy within different sections of the uncoated reinforcing steel. The relative energy levels can be determined in relation to a reference electrode with a stable electrochemical potential.


By connecting a high impedance voltmeter between the reinforcing steel and a reference electrode placed on the concrete surface, a measurement can be made for the half cell potential at the b of the reference cell. This then is a measurement of the probability of corrosion activity in the steel in the vicinity of the reference cell.


The reference cell is copper in a copper sulphate solution. By taking half cell potential measurements a fixed distance apart a grid of half cell potentials can be quickly made and thus areas delineated with a high probability of corrosion of the reinforcing steel.


To analyze the results, the measurements made with Cor Map can be plotted on a grid and lines of equipotential contours drawn, highlighting areas of possible corrosion activity.


For example the following guide is listed in ASTM


C-876 using a copper/copper sulphate half cell:


·         For readings of 350mV and greater there is a 95% chance of active steel corrosion


·         For readings 200 to 350mV there is a 50% chance of active steel corrosion


·         For readings less than 200mV there is only 5% chance of active steel corrosion


The b is particularly useful for:


·         Bridge Decks


·         Parking Garages


·         Concrete Piers & Docks


·         Substructure


·         Tunnel Lining


·         Foundations


Specifications


C-CM-4500 High impedance voltmeter
C-CM-4410 Electrode extension pieces each 18 inches (41 cm) long
C-CM-4400 Reference electrode including copper sulphate reservoir
C-CM-4210 Container of copper sulphate (capacity 250 ml)
C-CM-4220 Wetting agent reservoir (capacity 125 ml)
C-CM-4420 Dispensing sponge
C-CM-4300 Cable reel with 250 ft. (80 meters) cable
C-CM-4000 Complete system


  以上是美国NDT James C-CM-4000 Cor-Map钢筋锈蚀检测仪


美国NDT James相关产品介绍:

美国NDT James T-HT-1000 Humiditest混凝土钻孔湿度测试仪

美国NDT James T-C-10 T-C-20 Cementometer微波水泥含水率测试仪 美国NDT James T-S-30 Aquaprobe微波土壤含水率测试仪 美国NDT James T-M-170 Aquameter混凝土含水率测试仪 美国NDT James T-T-90 Trident插针式微波骨料含水率测试仪 美国NDT James I-CB-6000 Carbo Detect混凝土碳化深度酸碱指示剂 美国NDT James I-AS-3000 ASR-Detect混凝土碱骨料反应测试仪 美国NDT James A-AB-1200 A-AV-1300 A-AA-1100 Air Meters混凝土含气量测试仪 美国NDT JAMES Z-WP-1000 Windsor Probe混凝土强度枪击检测仪 美国NDT JAMES W-P-2000 Windsor Pin混凝土强度检测仪 美国NDT JAMES R-HR-8000 Mini R-Meter钢筋定位仪 美国NDT JAMES P-C-7300 Bond Test MK III粘结强度测试仪 美国NDT JAMES P-C-728 P-C-729 Anchor锚栓测试仪 美国NDT JAMES M-M-3056 Maturity Meter混凝土成熟度测试仪 美国NDT JAMES Datascan MK II钢筋混凝****达 美国NDT James C-P-6000 C-P-6050 Porosiscope混凝土渗气渗水性测试仪 美国NDT James C-CM-4000 Cor-Map钢筋锈蚀检测仪 美国NDT James C-CL-3000 Chlorimeter混凝土氯离子含量测定仪 美国NDT James W-M-350 W-M-250 Rebound Hamme机械回弹仪 美国NDT James W-D-2000 Rebound Hamme数字回弹仪 美国NDT James V-E-1000 E-Meter MK II动态弹性模量测试仪 美国NDT James V-V-100 Vu-Con冲击回波测试仪 美国NDT JAMES V-C-400 V-Meter MK IV混凝土超声波测试仪 美国NDT James C-CS-8000 C-CS-8300 Gecor 8钢筋锈蚀程度测定仪 美国NDT James C-RM-8000 Ohmcorr混凝土电阻率测定仪 美国NDT James C-CM-5000 Cor-Map II大屏幕半电池电压钢筋锈蚀检测仪 美国NDT JAMES R-C-400/450/475/410 Rebarscope钢筋扫描仪

温馨提示

  • 还没找到想要的产品吗? 立即发布采购信息,让供应商主动与您联系!

免责声明:所展示的信息由会员自行提供,内容的真实性、准确性和合法性由发布会员负责,机电之家网对此不承担任何责任。机电之家网不涉及用户间因交易而产生的法律关系及法律纠纷,纠纷由您自行协商解决。
友情提醒:本网站仅作为用户寻找交易对象,就货物和服务的交易进行协商,以及获取各类与贸易相关的服务信息的平台。为避免产生购买风险,建议您在购买相关产品前务必确认供应商资质及产品质量。过低的价格、夸张的描述、私人银行账户等都有可能是虚假信息,请采购商谨慎对待,谨防欺诈,对于任何付款行为请您慎重抉择!如您遇到欺诈等不诚信行为,请您立即与机电之家网联系,如查证属实,机电之家网会对该企业商铺做注销处理,但机电之家网不对您因此造成的损失承担责任!
您也可以进入“消费者防骗指南”了解投诉及处理流程,我们将竭诚为您服务,感谢您对机电之家网的关注与支持!

您是不是在找